Are Gutter Guards Worth It in Arcadia?

 

City in Florida, United States of America

Arcadia, Florida
City
City of Arcadia
Arcadia Historic District
Seal
Location of Arcadia in DeSoto County, Florida....
Coordinates: 27°12′54″N 81°51′32″W / 27.215°N 81.859°W / 27.215; -81.859
Country	United States of America
State	Florida
County	DeSoto
Incorporated	1886
Named after	Arcadia Albritton
Government
• Type	Mayor-Council
• Mayor	Robert W. Heine Jr.
• Deputy Mayor	Keith Keene
• Council Members	Mike Hall, Amber Collins, and Judy Wertz-Strickland
• City Administrator	Terry Stewart
• City Clerk	Penny Delaney
Area [1]
• Total	4.43 sq mi (11.48 km2)
• Land	4.43 sq mi (11.47 km2)
• Water	0.0077 sq mi (0.02 km2)
Elevation	60 ft (18 m)
Population  (2020)
• Total	7,420
• Density	1,675.7/sq mi (647.01/km2)
Time zone	UTC-5 (EST)
• Summer (DST)	UTC-4 (EDT)
ZIP codes	34265, 34266, 34269
Area code	863
FIPS code	12-01750
Website	www.arcadia-fl.gov

Arcadia is a city and county seat of DeSoto County, Florida, United States. Arcadia's Historic District is listed on the National Register of Historic Places. Its population was 7,420 as of the 2020 census, down from 7,637 at the 2010 census. It is the principal city of the Arcadia, Florida Micropolitan Statistical Area.

The area has a history of ranching and citrus growing. Citrus greening hurt the area's citrus industry.

History

[edit]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (January 2015) (Learn how and when to remove this message)

According to The Atlas of Florida, "The Rev. James Madison ("Boss") Hendry (1839–1922) named the town in honor of Arcadia Albritton (1861–1932), a daughter of Thomas H. and Fannie (Waldron) Albritton, pioneer settlers. Arcadia had baked him a cake for his birthday, and he appreciated it so much that he named the city after her."^[2]

In 1886, transportation improved in Arcadia when the Florida Southern Railway (later the Atlantic Coast Line Railroad) was built through Arcadia on its way from Bartow to Punta Gorda. The railway caused Arcadia to grow significantly, which led to it becoming incorporated a year later.^[3] A second railroad line, the Charlotte Harbor and Northern Railway (later the Seaboard Air Line Railroad), was built through Arcadia from 1907 to 1910 on its way from Mulberry to Boca Grande. Both lines have since been consolidated into a single line by CSX with the Seaboard line surviving north of Arcadia and the Atlantic Coast Line surviving to the south. Arcadia was also served by the short-lived East and West Coast Railway, which connected Arcadia with Bradenton from 1915 to 1934.^[4]

During the late 19th century Arcadia was the county seat of what would become many counties. In 1921, legislation enacted called for Arcadia to remain the county seat of DeSoto County and resulted in the creation of the present-day counties of Charlotte, Hardee, Glades and Highlands. Prior to this breakup, Arcadia's population had grown considerably, with over 1,000 permanent residents and 3,000 sq mi (7,800 km²) for ranching.

On Thanksgiving Day in 1905, the town was destroyed by a fire that originated from a midtown livery stable. The fire was exacerbated because the town did not have a working water system or fire department. The estimated monetary damage was $250,000, but no loss of life occurred. Much of the business district was not spared. The town recovered only years later.

Oak Street is the "main street" in Arcadia. The downtown is far more elaborate than neighboring counties' downtown areas, as Arcadia is older and was their county seat prior to the formation of their present counties. Arcadia is also home to many early 20th-century homes, houses of worship, and several historic public buildings.

From 1917 to 1922, Arcadia was the home of Carlstrom Field, a grass airfield of the U.S. Army Air Service named for deceased aviation pioneer Victor Carlstrom. Carlstrom Field was used for pilot training both during and after World War I. In May 1941, the site again became an airfield for military primary flight training, operated by the Embry–Riddle Aeronautical Institute (now Embry–Riddle Aeronautical University). Carlstrom Field, one of several satellite fields in the Fort Myers area, also trained pilots for the Royal Air Force until its closing in 1945. 23 RAF cadets that died during training are commemorated in Oak Ridge Cemetery.

Arcadia's historic buildings include the Johnson-Smith House, William Oswell Ralls House, and Micajah T. Singleton House. Also, around 3,400 acres, which includes the downtown area, are part of the Arcadia Historic District.

After three Arcadia children, the Ray brothers, were diagnosed with HIV in 1986, school officials refused to let them attend school. The Ray family won a $1.1 million judgement against the county school system, but were forced to leave Arcadia after their home was burned down in 1987, in what has been described as "almost certainly a case of arson."^[5]

Hurricane Charley and the 21st century

[edit]

In 2004, Arcadia was heavily damaged by Hurricane Charley, during which the eye went over the city, with winds measured up to 109 mph (49 m/s) at 5:27 pm. The winds were suspected to be stronger outside the city, but cannot be proven due to the lack of equipment outside the city. The city's only shelter, the Turner Agri Civic Center, was a shelter made to withstand winds over 100 mph (45 m/s), but it collapsed during the storm. Everyone evacuated into the hallways and the kitchen of the Turner Center prior to the collapse.^[6] The people in the Turner Agri Civic Center were evacuated to DeSoto High School, but soon, part of its roof collapsed. In the center of the town, the Old Opera House's roof was peeled off, causing severe water damage. The hurricane severely damaged downtown, especially businesses on Oak Street and Polk Street. Eventually, the Red Cross shelter was forced to evacuate due to the collapsing of the building. The city water tower crumpled along Florida State Road 70 and was never replaced after the hurricane. The city's only hospital was heavily damaged, with 35 windows shattering. Part of the roof peeled back, which exposed equipment and patients to the wind-driven rain. This caused an estimated $2.3 million in damages to the hospital.^[7] Hurricane Charley caused 3,600 homes to be destroyed or heavily damaged, and displaced 16,000 people.^[8] The exact amount of damage is not known, but it was ln the millions of dollars. Two people died in DeSoto County during the storm, and 150 people were injured. Many residents of the town left and never came back.^[9]

After Hurricane Charley, the people in DeSoto High School were taken to the middle school nearby, where at least 75 people spent the night in the middle school's gymnasium.^[10] The hurricane caused downtown to be heavily damaged. The storm caused 90% of homes in DeSoto County to be damaged and 60% to be uninhabitable or destroyed. The National Guard was deployed to the city and started the cleanup process and enforced a strict curfew in the city. The people of Arcadia came together and started helping each other after the storm, from feeding people to rebuilding. Although during the rebuilding process, the first wave of the Great Recession began, the people of Arcadia were able to rebuild their homes and bring new homes to the city. Downtown Arcadia was rebuilt, but some parts of the county are still damaged from Hurricane Charley. About 12 years were needed to rebuild, but parts of the city and county are still damaged from it.

In 2017, Hurricane Irma went over the city as a category 1 hurricane. It did not cause a huge amount of damage to the city. Some of the downtown area was damaged, with the Oak Park Inn taking considerable damage, and was not able to open for 4 months after the storm. Parts of DeSoto County were flooded, especially communities on the Peace River. The storm dropped 10-15 in of rain near Morgan Park on the Peace River. The river and its tributaries flooded roadways, homes, and parks. The damage extent is unknown.^[11]

In March 2020, Arcadia declared a local state of emergency in response to the COVID-19 pandemic.^[12] DeSoto county has had 10,174 cases of COVID-19.

On September 28, 2022, Hurricane Ian Made Landfall near Cayo Costa. The Hurricane struck as a strong Category 4 Hurricane, near Category 5 strength. The storm would go over the city of Arcadia as a Category 3 Hurricane. The Hurricane would cause major flooding along the Peace River, flooding homes and roads near or on the river. SR-72 collapsed, and buildings and homes in Arcadia would be damaged.

Geography

[edit]

Arcadia is located slightly northwest of the center of DeSoto County at

27°12′54″N 81°51′32″W / 27.215°N 81.859°W / 27.215; -81.859 (27.2176, –81.8599). The Peace River flows past the west side of the city on its way southwest to tidewater at Punta Gorda. Nearby Southeast Arcadia occupies a larger section of land, hosting a nearly equal, yet more dispersed population. Most of Arcadia is more than 40 feet (12 m) above sea level and portions of Arcadia near the center of the city are as high as 65 feet (20 m) above sea level, giving Arcadia one of the highest elevations for a city in Florida.

U.S. Route 17 passes through the center of Arcadia, leading north 50 miles (80 km) to Bartow and southwest 26 miles (42 km) to its terminus at Punta Gorda. Florida State Road 70 crosses US 17 in the center of Arcadia and leads east 64 miles (103 km) to Okeechobee and west-northwest 48 miles (77 km) to South Bradenton. Via SR 72, which splits from SR 70 just west of Arcadia, it is 44 miles (71 km) west to South Sarasota.

According to the United States Census Bureau, Arcadia has a total area of 4.1 square miles (10.6 km²), of which 0.01 square miles (0.02 km²), or 0.15%, is covered by water.

According to the Köppen climate classification, Arcadia has a humid subtropical climate (Cfa/Cwa), with hot, humid summers and warm, drier winters.

As of the 2020 United States census, there were 7,420 people, 2,953 households, and 1,755 families residing in the city.^[18]

In 2020, about 5.1% of the population were under 5 years old, 26.2% were under 18, and 13.7% were 65 and over; 49.9% of the population were female.^[19]

In 2020, 256 veterans were living in the city and 14.7% of the population were foreign-born. About 69.5% of the households had a computer and 58.0% had a broadband internet subscription. Around 80.9% of the population 25 and older were high-school graduates and 15.2% of that same population had a bachelor's degree or higher. Around 7.4% of the population under 65 had a disability and 17.3% of that same population did not have health insurance.^[19]

In 2020, the median household income was $34,003 and the per capita income was $18,376; 30.2% of the population lived below the poverty threshold.^[19]

As of the 2010 United States census, there were 7,637 people, 2,460 households, and 1,664 families residing in the city.^[20]

The City of Arcadia was created by an act of the Florida Legislature in 1886. Currently, the city is governed by a mayor-council form of government, with five council members elected at large to four-year terms of office, who in turn appoint a city manager to run the daily operation of the city. The council annually chooses a mayor and deputy mayor, who serve in the capacity of chairman of meetings and at ceremonial functions. Also elected by the residents is a city marshal who acts as chief of police. In addition to police service, the city provides residents with a water/sewer system, trash pickup, planning and zoning services, and public works.

Arcadia Municipal Airport is a public-use airport located 1 mile (1.6 km) southeast of the central business district. The City of Arcadia operates the day-to-day operations of the airport. The airport has a deep history of aviation, with the old Carlstrom and Dorr training fields in DeSoto County. It is leading the state in low fuel prices and has a fly-in and camp facility called Aviation City. Arcadia Municipal Airport hosts an annual Aviation Day event in March. The event consists of a static display of aircraft, biplane rides, helicopter rides, and a skydiving demonstration, but bigger plans are in the works.

Arcadia is located on the Peace River, the major tributary of the Charlotte Harbor estuary. The river offers fine canoeing, shark-tooth hunting, and natural habitats. Tours, recreational accessories, and accommodations are readily available.

Arcadia hosts DeSoto County's annual fair usually in the month of January. While traditional aspects of a fair or carnival are provided, the event also presents livestock shows consisting of swine and cattle, which are presented by the local FFA and 4-H.

Arcadia is also the home of three rodeos. These events, which are managed by the local rodeo association, occur during the month of March, the Fourth of July holiday, and in the fall. From the profits of these events many local charities, college scholarships and causes receive funding.

Arcadia is one of the largest groupings of antique dealers in the state, all located conveniently in the downtown area. The local dealers' association sponsors a "4th Saturday Antique Fair" each month from 8 am to 3 pm, bringing an additional 60 to 120 independent dealers in for the event.

Arcadia has numerous parades throughout the year—a Martin Luther King Jr. Day parade, a March rodeo parade, a Cinco de Mayo parade, an Independence Day parade, an October Homecoming parade, a Veterans Day parade, and a Christmas parade.

• WCXS (1480 Classic Country)
• WSRQ-FM (106.9 SRQ)
• WZSP-FM (105.3 La Zeta)
• The Arcadian, local print newspaper

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (May 2021) (Learn how and when to remove this message)

• Al Alberts - lead singer of The Four Aces
• Christina Bohannan, Iowa House of Representatives and Candidate for Congress in Iowa's 1st Congressional District in 2022
• Chris Clemons - professional National Football League player for the Miami Dolphins and Arizona Cardinals
• James L. Dozier - retired US Army general
• Brian Labrie - reality TV star and world record holder from the Science Channel’s Punkin’ Chunkin’ TV show
• T. J. Luther - professional football player in the NFL
• Bitsy Mott - born in Arcadia, Major League Baseball player
• Ray brothers - HIV activists
• Joey Redner - founder of Cigar City Brewing Company
• James Joseph Richardson, man wrongly convicted of poisoning his seven young children in October 1967^[21]
• John Paul Riddle - co-founder of Embry-Riddle Aeronautical University
• Brad Scott - former coach at Clemson Tigers
• Jeff Scott - head football coach of the South Florida Bulls
• Chesterfield Smith - president of the American Bar Association in 1973–1974

Wikimedia Commons has media related to Arcadia, Florida.

• City of Arcadia official website
• DeSoto Arts and Humanities Council Archived August 5, 2012, at the Wayback Machine
• DeSoto County Historical Society
• Desoto County Tourism Development Council
• Directory of the Peace River Valley

Component of a water discharge system

 

A rain gutter, eavestrough, eaves-shoot or surface water collection channel is a component of a water discharge system for a building.^[1] It is necessary to prevent water dripping or flowing off roofs in an uncontrolled manner for several reasons: to prevent it damaging the walls, drenching persons standing below or entering the building, and to direct the water to a suitable disposal site where it will not damage the foundations of the building. In the case of a flat roof, removal of water is essential to prevent water ingress and to prevent a build-up of excessive weight.

Water from a pitched roof flows down into a valley gutter, a parapet gutter or an eaves gutter. An eaves gutter is also known as an eavestrough (especially in Canada), spouting in New Zealand, rhone or rone (Scotland),^{[2][3][4][5][6]} eaves-shoot (Ireland) eaves channel, dripster, guttering, rainspouting or simply as a gutter.^[7] The word gutter derives from Latin gutta (noun), meaning "a droplet".^[8]

Guttering in its earliest form consisted of lined wooden or stone troughs. Lead was a popular liner and is still used in pitched valley gutters. Many materials have been used to make guttering: cast iron, asbestos cement, UPVC (PVCu), cast and extruded aluminium, galvanized steel, wood, copper, zinc, and bamboo.

Description

[edit]

Gutters prevent water ingress into the fabric of the building by channelling the rainwater away from the exterior of the walls and their foundations. ^[9] Water running down the walls causes dampness in the affected rooms and provides a favourable environment for growth of mould, and wet rot in timber.^{[citation needed]}

A rain gutter may be a:

• Roof integral trough along the lower edge of the roof slope which is fashioned from the roof covering and flashing materials.
• Discrete trough of metal, or other material that is suspended beyond the roof edge and below the projected slope of the roof.
• Wall integral structure beneath the roof edge, traditionally constructed of masonry, fashioned as the crowning element of a wall.^[10]

A roof must be designed with a suitable fall to allow the rainwater to discharge. The water drains into a gutter that is fed into a downpipe. A flat roof should have a watertight surface with a minimum finished fall of 1 in 80. They can drain internally or to an eaves gutter, which has a minimum 1 in 360 fall towards the downpipe. ^[11] The pitch of a pitched roof is determined by the construction material of the covering. For slate this will be at 25%, for machine made tiles it will be 35%. Water falls towards a parapet gutter, a valley gutter or an eaves gutter. ^[12] When two pitched roofs meet at an angle, they also form a pitched valley gutter: the join is sealed with valley flashing. Parapet gutters and valley gutters discharge into internal rainwater pipes or directly into external down pipes at the end of the run. ^[12]

• 
  A parapet gutter at the base of a sloping roof and a parapet wall, outflowing to a downpipe
• 
  A simpler parapet gutter.
• 
  A valley gutter between two parallel roof surfaces.

The capacity of the gutter is a significant design consideration. The area of the roof is calculated (metres) and this is multiplied by rainfall (litres/sec/metres²) which is assumed to be 0.0208. This gives a required discharge outfall capacity. (litres/sec) .^[13] Rainfall intensity, the amount of water likely to generated in a two-minute rainstorm is more important than average rainfall, the British Standards Institute^[14] notes that an indicative storm in Essex, (annual rainfall 500 mm per annum) delivers 0.022 L/s/m²- while one in Cumbria (annual rainfall 1800 mm per annum) delivers 0.014 L/s/m².^[15]

Eaves gutters can be made from a variety of materials such as cast iron, lead, zinc, galvanised steel, painted steel, copper, painted aluminium, PVC (and other plastics) and occasionally from concrete, stone, and wood.^[16]

Water collected by a rain gutter is fed, usually via a downpipe (also called a leader or conductor),^[17] from the roof edge to the base of the building where it is either discharged or collected.^[18] The down pipe can terminate in a shoe and discharge directly onto the surface, but using modern construction techniques would be connected through an inspection chamber to a drain that led to a surface water drain or soakaway. Alternatively it would connect via a storm drain (u-bend) with 50 mm water seal to a combined drain.^[19] Water from rain gutters may be harvested in a rain barrel or a cistern.^[20]

Rain gutters can be equipped with gutter screens, micro mesh screens, louvers or solid hoods to allow water from the roof to flow through, while reducing passage of roof debris into the gutter.^[21]

Clogged gutters can also cause water ingress into the building as the water backs up. Clogged gutters can also lead to stagnant water build up which in some climates allows mosquitoes to breed.^[22]

The Romans brought rainwater systems to Britain. The technology was subsequently lost, but was re-introduced by the Normans. The White Tower, at the Tower of London had external gutters. In March 1240 the Keeper of the Works at the Tower of London was ordered by King Henry "to have the Great Tower whitened both inside and out". This was according to the fashion at the time. Later that year the king wrote to the Keeper, commanding that the White Tower's lead guttering should be extended with the effect that "the wall of the tower ... newly whitened, may be in no danger of perishing or falling outwards through the trickling of the rain".^[23]

In Saxon times, the thanes erected buildings with large overhanging roofs to throw the water clear of the walls in the same way that occurs in thatched cottages. The cathedral builder used lead parapet gutters, with elaborate gargoyles for the same purpose. With the dissolution of the monasteries- those buildings were recycled and there was plenty of lead that could be used for secular building. The yeoman would use wooden gutters or lead lined wooden gutters.

When The Crystal Palace was designed in 1851 by Joseph Paxton with its innovative ridge-and-furrow roof, the rafters that spanned the space between the roof girders of the glass roof also served as the gutters. The wooden Paxton gutters had a deep semi-circular channel to remove the rainwater and grooves at the side to handle the condensation. They were under trussed with an iron plate and had preformed notches for the glazing bars: they drained into a wooden box gutter that drained into and through structural cast iron columns.^[24]

The Industrial Revolution introduced new methods of casting-iron and the railways brought a method of distributing the heavy cast-iron items to building sites. The relocation into the cities created a demand for housing that needed to be compact. Dryer houses controlled asthma, bronchitis, emphysema as well as pneumonia. In 1849 Joseph Bazalgette proposed a sewerage system for London, that prevented run-off being channelled into the Thames. By the 1870s all houses were constructed with cast iron gutters and down pipes. The Victorian gutter was an ogee, 115 mm in width, that was fitted directly to the fascia boards eliminating the need for brackets. Square and half-round profiles were also available. For a brief period after the first world war, asbestos-cement guttering became popular due to it being maintenance free: the disadvantages however ensured this was a short period: it was more bulky and fractured on impact. ^[25]

Cast iron gutters were introduced in the late 18th century as an alternative to lead. Cast iron enabled eaves gutters to be mass-produced: they were rigid and non-porous while lead could only be used as a liner within timber gutters. Installation was a single process and didn't require heat.^[26] They could be attached directly to the fascia board. Cast iron gutters are still specified for restoration work in conservation areas, but are usually replaced with cast aluminium made to the same profile. Extruded aluminium gutters can be made to a variety of profiles from a roll of aluminium sheet on site in lengths of up to 30 m. They feature internal brackets at 400 mm spacing.^[27]

In UK domestic architecture, guttering is often made from UPVC sections. The first PVC pipes were introduced in the 1930s for use in sanitary drainage systems. Polyethylene was developed in 1933. The first pressurised plastic drinking water pipes were installed in the Netherlands in the 1950s. During the 1960s rain water pipes, guttering and down pipes using plastic materials were introduced followed by PVC soil systems which became viable with the introduction of ring seals. A British Standard was launched for soil systems, local authorities started to specify PVC systems. By 1970 plastic rainwater systems accounted for over 60% of new installations.^{[citation needed]} A European Standard EN607 has existed since 2004.^{[citation needed]}

• 
  A collector with 112 mm gutter, draining into 68 mm downpipe
• 
  Available gutter fittings
• 
  Available pipe and gutter fittings
• 
  Fitting a gutter to a 45° connector

It is easy to install, economical, lightweight requires minimum maintenance and has a life expectancy of 50 years. The material has a disadvantageous coefficient of thermal expansion 0.06 mm/m°C, so design allowances have to be made. A 4-metre gutter, enduring a −5 °C to 25 °C temperature range will need space to expand, 30 × 4 × 0.06 = 7.2 mm within its end stops.^[28] As a rule of thumb a 4-inch (100 mm) gutter with a single 68-millimetre (2.7 in) downpipe will drain a 600-square-foot (56 m²) roof.^[29]

High quality stainless steel guttering systems are available for homes and commercial projects. The advantages of stainless steel are durability, corrosion-resistance, ease of cleaning, and superior aesthetics. Compared with concrete or wood, a stainless steel gutter will undergo non-negligible cycles of thermal expansion and contraction as the temperature changes; if allowance for this movement is not made during installation, there will be a potential for deformation of the gutter, which may lead to improper drainage of the gutter system.

Seamless gutters have the advantage of being produced on site with a portable roll forming machine to match the specifications of the structure and are generally installed by experienced tradesman. Seamless gutter is .027" thick and if properly installed will last 30+ years.^{[citation needed]}

In commercial and domestic architecture, guttering is often made from zinc coated mild steel for corrosion resistance. Metal gutters with bead stiffened fronts is governed in the UK by BS EN612:2005.

Copper guttering boasts water cleaning abilities that stem from the antimicrobial properties of copper. It also develops patina that is commonly associated with the copper material, where the gutter system's colour darkens within the first few years and then transitions to a dark green at seven years. Copper gutters reach their full patina state at twenty years, however a verdigris solution can be used on the system to speed this process up drastically.^[30]

Aluminium gutters offer good corrosion resistance, are lightweight, and are easy to install. Additionally, aluminium gutters come in a variety of finishes and styles.^[31]

• 
  Aluminium gutters in Moscow

Finlock gutters, a proprietary name^[32] for concrete gutters, can be employed on a large range of buildings. There were used on domestic properties in the 1950s and 1960s, as a replacement for cast iron gutters when there was a shortage of steel and surplus of concrete. ^{[citation needed]} They were discredited after differential movement was found to open joints and allow damp to penetrate, but can be fitted with an aluminium and bitumastic liner.^[33] Finlock concrete gutter units are made up of two troughs – one is the visible gutter and the other sits across the cavity wall. The blocks which can range from 8 to 12 inches (200 to 300 mm) can be joined using reinforcing rods and concrete, to form lintels for doors and windows.^[33]

Guttering can be made from any locally available material such as stone or wood. Porous materials may be lined with pitch or bitumen.

• 
  Wooden gutter at an open air museum
• 
  Wood used on a stone building
• 
  Stone gutter in Burgundy
• 
  Stone gutters in Slovenia

Today in Western construction we use mainly three types of gutter profiles - Fascia style, half round, and box. In days past there were 12 gutter shapes/styles.

Gutter guards (also called gutter covers, gutter protection or leaf guards) are primarily aimed at preventing damage caused from clogged gutters and reducing the need for regular gutter cleaning. They are a common add-on or included as an option for custom-built homes.

Brush gutter guards resemble pipe cleaners and are easy to install. They prevent large debris from clogging gutters, but are less effective at reducing smaller debris.

Foam gutter guards are also easy to install. They fit into gutters, so they prevent large objects from obstructing waterflow, but they do not prevent algae and plant growth. A negative feature of foam type filters is that the pores quickly get clogged and thus need replacement due to not allowing water to pass through.

Reverse curve or surface tension guards reduce clogged gutters by narrowing the opening of the gutters. Many find them to be unattractive and difficult to maintain.

Screen gutter guards are among the most common and most effective. They can be snapped on or mounted, made of metal or plastic. Micromesh gutter guards provide the most protection from small and large debris.^[34]

PVC type gutter guards are a less costly option, however, they tend to quickly become brittle due to sun exposure.

• Sima (architecture)
• Chantlate
• Copper in architecture
• Cornice
• Rain chain
• French drain

Bibliography

• Chudley, R. (1988). Building construction handbook. London: Heinemann. ISBN 0434902365.
• Impey, Edward; Parnell, Geoffrey (2000), The Tower of London: The Official Illustrated History, Merrell Publishers in association with Historic Royal Palaces, ISBN 1-85894-106-7
• Maskrey, Michael B (2012). Level 2 NVQ diploma in plumbing and heating. London: City & Guilds. ISBN 9780851932095.
• Hall, E (1982). The New home owner manual. London: Hamlyn. ISBN 0600349918.

Wikimedia Commons has media related to Rain gutters.

• An Illustrated glossary of roofs and roofing terms.
• Tutorial on installing plastic guttering
• Tutorial on installing metal sheet guttering